Coverage shaped around your boat, the way you store it and the details that matter. Plan a custom full boat or mooring cover with Canvas Designers in Riviera Beach, Florida.
Made to order · Riviera Beach, FL · Serving boaters since 1985
View full photo ↗
A mooring cover is shaped to protect a boat while it is docked, moored or stored. Full covers extend over a broader area than separate console, seat or cockpit covers. The coverage and fastening arrangement are planned for the particular boat.
A storage cover should not be assumed suitable for road towing. Tell the team before design work if you need a travel cover. The construction, securing method and any extra straps need to suit that intended use.
From a full-size center console to the tender on deck, the cover starts with the boat and its storage setup.
Enlarge ↗
Plan coverage around the hull, console, hardtop, motors and the areas you want to keep protected between outings.
See full boat cover projects ↗
Enlarge ↗
Discuss how your tender is stowed, lifted and accessed. Share photos of its seating, fittings and storage arrangement.
Discuss your tender cover ↗
Enlarge ↗
A fitted cover for a Jet Ski or other personal watercraft starts with its model and the way it is kept on deck or in storage.
Plan a watercraft cover ↗
Enlarge ↗
This full-cover project shows how the fabric, hardtop and rubrail attachments work together. The details below describe this boat’s cover.
Fabric and attachment details are selected for each project.
Enlarge ↗
Pin-and-ring fasteners for compatible cockpit and custom boat covers. Explore the product details and options for your cover setup.
For covers designed for pin-and-ring attachments. Ask us to check compatibility with your cover and rubrail before ordering.
Compare shapes, coverage areas and fastening layouts in five more original project photos.
Tell us how the boat is kept, how you get aboard and how you want to handle the cover. Those details help shape the design before fabric is cut.
Discuss fabric, color, handling and care together. Our marine canvas options include Sunbrella, WeatherMAX and Stamoid by Serge Ferrari. The right choice depends on the application.
Full coverage, a cockpit panel or separate equipment covers serve different needs. Include boarding points, doors and any areas you need to reach while the cover is on.
Show the hardtop, T-top, rails, antennas, motors and existing fastenings. Attachment details can include straps, tracks or pins, depending on the particular design.
Explain whether the boat sits at a dock, on a lift, on a trailer or indoors. Tell us who will remove the cover, where it will be stowed and whether road towing is part of the plan.
Send useful photos and a few boat details. Our team can then discuss the coverage, material and fitting requirements.
Send the make, model, year and boat location, with clear photos from the bow, stern and both sides.
Discuss the coverage, fabric, access and attachment layout. Include photos of an existing cover if you are replacing one.
Review the design, measurements, fitting arrangements and quote with the team before the final cover is made.
Visit our marine canvas workshop at 1500 Australian Avenue, Riviera Beach, FL 33404. Tell us where your boat is located so we can discuss fitting and installation for your project.
Call ahead to discuss your boat’s location and fitting requirements.
Understand the design, coverage and everyday use before planning your custom cover.
Ask about your boat ↗The design starts with the boat’s shape, the areas to cover and its storage conditions. The team reviews fabric, access and fastening details, then confirms the measurements and project requirements before fabrication.
A full boat cover extends over a broader part of the boat. A cockpit cover focuses on the aft cockpit or seating area. The right choice depends on the coverage you need and how you want to access the boat.
Yes. The project examples on this page include a tender cover and a personal watercraft cover. Send the make, model, location and photos of the storage arrangement to discuss your particular cover.
Discuss the boat’s exposure, storage conditions, handling and care requirements with the team. Canvas Designers offers marine canvas options including Sunbrella, WeatherMAX and Stamoid by Serge Ferrari. Material and color are selected for each project.
Tell us before the design is agreed if you need a travel cover. A cover made for dockside or storage use should not be assumed suitable for towing. Confirm the construction, securing arrangement and any extra straps for your boat.
The quote depends on the boat, coverage area, fabric, attachment details and fitting requirements. Send your boat’s make, model, year, location and photos so the team can discuss a project-specific quote.
Our workshop is at 1500 Australian Avenue, Riviera Beach, FL 33404. Call 561-848-2111 to discuss your boat’s location, cover design and fitting requirements. Canvas Designers has served the marine community since 1985.
Share your boat model, photos and storage setup. We’ll help you work through the next steps.
