EZ2CY Cleaner & Polish 14oz | Boat Enclosure Cleaner

EZ2CY Cleaner & Polish 14oz is the double-size bottle of the cleaner and protectant made for the patented EZ2CY® enclosure system. It cleans, polishes, and protects isinglass, acrylic, and clear vinyl in one step, leaving an anti-static, anti-fog, water-shedding finish behind. The 14oz size suits full enclosures and boats that get wiped down after every trip.

Canvas Designers invented EZ2CY and has built custom marine canvas and enclosures in Riviera Beach, Florida since 1985. This is the bottle our own installation team uses on EZ2CY builds.

One step: clean, polish, protect

• Cleans and polishes in one pass. Lifts dirt, salt film, and spray residue, then buffs to a streak-free finish.
• Clears light haze. Polishes away surface dullness as it cleans, so panels look newer with every wipe-down.
• Fights static. The anti-static formula cuts down the dust and dirt buildup that marine air deposits.
• Resists fog. Anti-fog protection keeps panels clearer in humid or cool conditions.
• Sheds water. Rain and spray bead up and roll off instead of drying into spots.

Sized for the whole enclosure

A full enclosure is a lot of panel. A sportfish flybridge, a motor yacht aft deck, or a multi-panel center console setup runs through a small bottle fast when you clean after every trip. The 14oz is the value size for that routine. Starting out or keeping a bottle in the console? The EZ2CY Cleaner & Polish 7oz is the same formula in a smaller bottle, and the Cleaner and Polish Combo pairs the cleaner with the Scratch Remover.

Directions

1. Rinse the surface with fresh water to float off loose salt and debris.
2. Apply a small amount to a clean microfiber cloth.
3. Work in gentle circular motions across the panel.
4. Buff to a clear, streak-free finish with a second clean cloth.
5. Repeat on stubborn film or heavy haze.

What to avoid: ammonia-based glass cleaners, rain repellents, acetone, and alcohol. On isinglass and acrylic they cause cloudiness, crazing, or cracking that doesn't buff out.

Panels with true light scratches get the EZ2CY Scratch Remover first, then Cleaner & Polish to finish and protect.

What it works on

• EZ2CY rigid acrylic enclosure panels
• Soft isinglass and eisenglass panels
• Conventional clear vinyl enclosures
• Plastic enclosure tracks and frames
• Instrument covers and gauge housings
• Hatches, port windows, even eyeglasses and sunglasses

Made for EZ2CY enclosures

The panels this bottle protects block 98% of UV rays, compared with approximately 71% for standard vinyl. That clarity is why owners choose EZ2CY acrylic, and routine care is how it lasts. Center console, sportfish, motor yacht, or sailboat, the routine is the same. Our boat enclosure comparison guide covers the clear materials side by side, and the care and maintenance page covers the rest of the boat.

Specifications

Frequently asked questions

What's the difference between the 14oz and the 7oz bottle?

Size. It's the same cleaner and protectant formula in a double-size bottle. The 14oz suits full enclosures, flybridges, and boats that get wiped down after every trip. The 7oz makes sense for smaller boats, day use, or a first bottle to try the product.

Can I use household glass cleaner on my enclosure?

No. Ammonia-based glass cleaners, rain repellents, acetone, and alcohol cause cloudiness, crazing, or cracking in isinglass and acrylic, and that damage doesn't buff out. Clear plastic needs a cleaner made for clear plastic. EZ2CY Cleaner & Polish cleans the surface and protects it instead of attacking it.

Does EZ2CY Cleaner & Polish remove scratches?

It clears light haze and surface dullness as it cleans. For true light scratches, start with the EZ2CY Scratch Remover, then follow with Cleaner & Polish for shine and protection. A gouge deep enough to catch a fingernail needs professional refinishing or a replacement panel. Call (561) 848-2111 for that.

How often should I clean my boat enclosure?

After every saltwater trip when you can, and at least every two weeks during the season. Salt crystals scratch when panels get wiped dry, and UV bakes grime into the surface. Frequent light cleanings keep the material clear and extend its working life.

Is it safe on soft isinglass and eisenglass panels?

Yes. It works on soft isinglass (also spelled eisenglass) the same way it works on rigid EZ2CY acrylic. Soft panels scratch more easily than rigid ones, so use a clean soft cloth, light pressure, and rinse first so you're not dragging grit across the vinyl.

Should I clean both sides of the panels?

Yes. Salt and spray hit the outside while fingerprints and condensation film build up on the inside. The anti-fog properties do their best work on the interior surface, where morning condensation forms. Use the same routine on both sides: rinse where you can, soft cloth, light pressure, buff dry.